

Banner
This solar power management module is designed for 6V~24V solar panel. It can charge the 3.7V Li battery through solar panel or USB connection, and provides 5V/1A regulated output.
The module features MPPT (Maximum Power Point Tracking) function and multi protection circuits, therefore, it is able to keep working with high-efficiency, stability, and safety. It is suited for solar powered, low-power IoT, and other environmental protection projects.
(edit with the Customer Reassurance module)
(edit with the Customer Reassurance module)
(edit with the Customer Reassurance module)
Features
1. Supports MPPT (Maximum Power Point Tracking) function, maximizing the efficiency of the solar panel
2. Supports solar panel / USB connection battery charging
3. For 6V~24V solar panel, DC-002 jack input or screw terminal input
4. Onboard MPPT SET switch, select the level closed to input level to improve charging efficiency
5. Two 5V output interfaces: pinheaders and USB port
6. Onboard high capacity aluminum electrolytic capacitor and SMD ceramic capacitor, reducing the ripple, stable performance
7. 14500 battery holder and PH2.0 battery connector, for connecting multi kinds of 3.7V Li battery
8. Several LED indicators, for monitoring the status of solar panel and battery
9. Multi protection circuits: over charge / over discharge / reverse protection / over heat / over current, stable and safe to use
Specifications
1. Solar panel input voltage (SOLAR IN): 6V~24V
2. Micro USB input voltage (USB IN): 5V
3. Pinheader / USB output (USB OUT): 5V 1A
4. Charging cutoff voltage: 4.2V+/-1%
5. Over discharging protection voltage: 2.9V+/-1%
6. Solar panel charge efficiency: ~78%
7. USB charge efficiency: ~82%
8. 3.7V battery boost output efficiency: ~86%
9. Max quiescent current: <2mA
10. Operating temperature: -40~85C
11. Dimension: 65.2mm x 56.2mm x 22.9mm
Referenca: RC-050a
Kabllo të dhënash & karikimi & Type-C i përshtatshëm për telefonat më të fundit të modelit Android (Shembull: Samsung Galaxy S8, S8 +, LG G5, G6, HUAWEI Nexus 6p dhe më shumë)
Referenca: WS-13460
Marka: Waveshare
This is a handy, low power Raspberry Pi HAT which features multi communication functionalities: GSM, GPRS, GNSS and Bluetooth. It allows your Pi to easily make a telephone call, send messages, connect to wireless Internet, global position, transfer data via Bluetooth, and so on.
Referenca: GE-B0050
Audio USB Receiver Transmitter Computer Desktop Driverless Bluetooth 5.0 Adapter
Referenca: 6519B
compatible to: all devices in which a 14500 cell is required, e.g. in the household, in model making, in the garden and leisure sector etc. Technical Data: Appellation: 14500 Li-Ion Type: ICR14500 Capacity: 800mAh Nominal voltage: 3,7V Charge voltage: 4,2V ± 0.02V Discharge voltage: 2.75 Maximum charge current: 1500mA Diameter: 14.3 ± 0.2mm Diameter Pol:...
Referenca: LDTR-WG0166
LDTR-WG0166 DIY 50Kg Body Load Cell Weighing Sensor Resistance Strain Half-bridge Original for DIY Arduino Etc
Referenca: WS-11092
Marka: Waveshare
This is a calibrated digital temperature and humidity module with onboard sensor DHT22 (AM2302), which features higher accuracy and wider measuring range than DHT11. It can be used for detecting ambient temperature and humidity, through the standard single-wire interface.
Referenca: WS-16332
Marka: Waveshare
This is a general GNSS module which supports Multi-GNSS systems: GPS, BDS, and QZSS, with advantages such as fast positioning, high accuracy, low power consumption, and so on.
This solar power management module is designed for 6V~24V solar panel. It can charge the 3.7V Li battery through solar panel or USB connection, and provides 5V/1A regulated output.
The module features MPPT (Maximum Power Point Tracking) function and multi protection circuits, therefore, it is able to keep working with high-efficiency, stability, and safety. It is suited for solar powered, low-power IoT, and other environmental protection projects.